takky drive 2
US$295

order at takky engineering USA [g-box@sbcglobal.net]
$18 EMS shipping takes 7-10 days from JAPAN.


Takky Drive 2 was the overdrive evolved more practically than Takky Drive. A palm, it was natural and dynamic on the body of size, and the good overdrive sound of an omission was inherited as it was, and enabled a total of six sorts of character changes It can respond with a clean, crunch a lead by this one set. The width of a sound making is expanded and, probably, your play is supported powerfully.


Characteristic

> BOOST switch built-in
> 6mode character switch
> 3PDT foot switch
> Switch Craft jack of certain connect
> Original perfect true by-pass
> 5mm bright LED lamp
> Socket type JRC 4558D IC
> Exclusive circuit of original design
> 30' western electric wire
> Hammond alum case
> Enameling red color paint

Control knob

The illustration expresses explanation of a function.

Trumpet ... LEVEL ... An effect output is adjusted.
Cat ... TONE ... A tone is adjusted.
Car ... DRIVE ... The amount of drives at the time of Boost Off is established.
Air plane ... BOOST ... Boost level at the time of Boost On is established.

Boost Switch

This adds a drive level by boost knob like a FD. What is necessary will be just to always use it in Boost On to always obtain a high gain.

Boost Off setup of a drive knob

Boost On setup of a drive knob + setup of a Boost knob


Get one pedal and three different sounds you can have, in all modes give to you outstanding useful sounds. There are switches on the side so it prevents mishandle.


Explanation in each mode
.
OFF DryEdge drive sound that a touch of dry and effective edge.
Normal a standard of pure drive and well-balance vintage over drive.
Harmonix modern sounds more harmonic and mellow compared with Normal.
ON MS The hard drive sounds against which the edge used Light Emitting Diode for clipping was effective.

DB The drive sound which the clipping circuit of is lost and does not have a feeling of compression.
TS Tube Screamer system sound.

Input and the output jack are arranged on the rear surface of a main part. AC adapter jack is arranged at the side. A foot switch is not in an end like that. Doesn't a pedal reverse? It may become the worries to say. Please feel easy! In fact, there is a secret in the position of this jack. If a jack is stabbed with a shield, even if weight balance will become back and will despise ahead, it hardly reverses.

The inside is assembled by hand of Takky. We use the printed circuit board only for Takky Drive and the Kester's Solder for the main substrate. We realized positive connection for using the product of Switch Craft Company already is called time-tested. The battery is selecting what stores in a box and cannot disconnect a battery snap easily, either.


Baking paint and screen-stencil are commissioned to the special contractor. The skillful paint craftsman has finished carefully one by one. There is intensity also in the film of paint, and he feels easy about it, and gets used to usage.



Special order Mirror finish model.

takky drive 2 spec



Size  
Weight
Battery 006P (Ext power :9V center -)
price US $295

For international Customer
We deliver takky drive2 all over the world.


takky engineering USA
g-box@sbcglobal.net
please contact us.


Copyright (C) 2003 takky engineering. All Rights Reserved.